On Wednesday 30 April 2003 03:17 pm, Picdude wrote:
> Okay, I'll buy that, and will adopt in my designs from now, but...
>
> I'm still suffering here.  PCB version checks out okay, including
> the debug mode on the SW which manual exercises the pins (that go
> to the PIC), and all checks out fine.
>  - Voltages are perfect now -- 5.04V and 13.4V f/MCLR.
>  - I've pulled RB3/PGM low by jumpering to ground.
>  - Eliminated the cable as a suspect, by connecting the programmer
> directly to the port.
>  - Both Vss pins connected to ground.
>
> But alas, same prob.... says pic is protected and needs to be.
> Erasing does not help any.

Nothing connected to the programming pins RB6/RB7?

--
Ned Konz
http://bike-nomad.com
GPG key ID: BEEA7EFE

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body