I was working on a board today and made the mistake of turning on
the angle and grid in DRC. Now I have a flood of errors on this board.

The angle errors are weird as they occur even on autorouted segments.
It supposedly is just checking for multiples of 45=B0's

The grid errors are saying the pads are not on the grid, again a strange=
 error
as the grid was used from the first step. I've nudged a few guilty parts=
 around
but am still getting the error. Other than starting a new board anyone have
any ideas?

TIA

Dave

(I'll post this to the eagle group later)

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.