At 17:04 29/04/2003 +0200, QAC wrote:
>(Well, I'm going to stop this thread soon...)
>
>Yes, but you described a 3 pin sensor with *two*

I know.

>signal pins. I have a 3 pin sensor with :
>
>One pin to GND
>One pin (via a inductor) to power
>One pin to the IC

I sincerely doubt this is the case. More likely you may have
made a mistake somewhere and you'll actually have one pin to
either GND or power, but not both, and 2 signal pins, no
matter how they are connected. But just play around with it,
you'll find out yourself.

G.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.