(Well, I'm going to stop this thread soon...)

Yes, but you described a 3 pin sensor with *two*
signal pins. I have a 3 pin sensor with :

One pin to GND
One pin (via a inductor) to power
One pin to the IC

Jan-Erik.

Guillermo Rodriguez Garcia wrote:

> Then it is as I described at the beginning, one led and
> *TWO* sensors (mounted in a single receiver) per wheel.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.