At 08:59 AM 4/29/2003 +0200, you wrote:
>Picdude wrote:
> > And I'm sure all components
> > can't be dunked in, so some must be done later, but wouldn't the solder
> bath
> > plug up the holes?
>
>Mostly a problem on double sided boards with plated through holes.
>Just do as the professionals, use standard round toothpicks to "plug" the
>un-populated holes.

There are other ways- goop that can be automatically or manually put on
the board and peeled off later, and of course the every-popular polyimide
tape.

Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the reward"
speff@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.