At 05:09 PM 28/04/03, you wrote:
>Were there ever any responses to this?  I never saw any, and can't find
>anything in the archives, but am very curious about using solder pots.

You mean like a old electric frying pan some aluminum angle and a push stick
and a dross stick????

All the boards I'm doing are small about 2x3" but I need to do about 500 of
them.
I'm just waiting for the boards to show up to try it.

The angle needs just enough of a bend to get the board onto the minicus of
the solder
and about a 5 second push through is all it takes (or should). If I could
work out a
way to produce a wave it would make things easier too. The only thing I can
think of
trying is a perforated steel rod  on the bottom of the pan with a nitrogen
bottle supply.

Like I said I don't know if this is going to work or if its a nifty
sculpture. I looked all over
for info on building a wave machine. Found a few on Ebay for about $400 but
they were
in Florida which would have been a killer for shipping.

Dave

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics