Thanks for the feedback. After a look at the archives I found somebody with=

a similar problem to mine that had forgotten to switch off the A/D
converter. Unfortunately I don't have my code in front of me to check
this(I'm almost sure I switched it off though)so I'll only be able to check=

this later.

Regards
Jason


> Hi,
>
> I am busy trying to program a 12f675 to flash an LED. When I
> compile my code
> in MPLab I get message [302]: 'Register in operand not in bank0'. This
> worries me as my registers are pretty important to my code actually doing=

> anything.  The odd thing is when I downloaded some sample code from the
> Microchip website for the 12f629 (very similar except for the a/d
> converter)
> I find that their code purposely suppresses these messages!?!
> Anyway at the
> end of the day my very basic code doesn't work. I then proceeded
> to download
> a blinking led hex file from Wouter van Ooijen's website and that works
> perfectly. It would seem that the problem definely lies in my
> code - which I
> have checked and rechecked - or in the assembly process. I can't
> find sample
> code for this pic anywhere. Anybody have any clues or assembler templates=

> for the 12f675?
>
> Thanks in advance.
>
> Regards
> Jason Dini
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>
>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads