Yeah, I am taking senior design and I am using a PIC for my project.  The
parts shop at State only had 8 to 10 MHz oscillators on hand, thats why I am
looking from a 20MHz one.  Thanks for the advice.

--------------------------------------------
Joshua Melbourne White
Vice Chair
NCSU Student Chapter of IEEE
Treasurer
Eta Kappa Nu, Beta Eta Chapter
North Carolina State University
Electrical and Computer Engineering
--------------------------------------------


-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Chuck Rice
Sent: Friday, April 18, 2003 6:30 PM
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: Recommended oscillator


Ahh, NCSU my old alma mater. I would recommend Digikey part number
X909-ND. That's a 20MHz ceramic resonator with built in capacitance.

They are quite rugged, with strong pins that fit easily into sockets.
You'll have to put it in sideways of course because of the grounding
pin. That's how we did our project for Sutton's class. I assume that's
what this is for? ;)

Incidentally, you are aware there is a part's shop on campus where you
can get most of this stuff for free right? Assuming it is for a class.
Reply to me via email if you would like details. (ChuckPL@comcast.net)

Hope this helps,

-==-

-----Original Message-----
>From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Josh White
Sent: Thursday, April 17, 2003 2:09 PM
To: PICLIST@MITVMA.MIT.EDU
Subject: Recommended oscillator

Hello everyone,

I am fairly new at this.  I want to use a PIC16F84A using a 20MHz
oscillator.  The oscillator needs to be pretty accurate so I think I
will
need a crystal.  Do you have any recommendations what
kind/manufacturer/ect
that I should use.  Part numbers would help me out a lot.  Thanks.

--------------------------------------------
Joshua Melbourne White
Vice Chair
NCSU Student Chapter of IEEE
Treasurer
Eta Kappa Nu, Beta Eta Chapter
North Carolina State University
Electrical and Computer Engineering
--------------------------------------------

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics