Good idea, tomorrow I'll open it (very gently) and see what chip it is. I
couldn't find any info on the card on the internet, just a generic one I
think.
Cheers
Justin

-----Original Message-----
From: Mike Harrison [mailto:mike@WHITEWING.CO.UK]
Sent: Tuesday, 15 April 2003 7:40 PM
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [EE]: PCMCIA modem connections


On Tue, 15 Apr 2003 16:23:42 +1000, you wrote:

>Thanks Adam and Mike
>I wonder if I can get the pinout and then talk to the card through windows
>(or dos), ie send commands to it and see what it does...
>
>Justin
Yes - if you just plug it into a PCMCIA port on Windows95/98, it will get
mapped into I/O space (you
can find the address in device manager), and poke at it from a DOS window.

You could do it in DOS, but DOS PCMCIA drivers are all a bit of a nightmare.


May also be worth ripping open a modem card - you may be able to find the
datasheet of the chip they
use. Or have a look for PCMCIA modem chips - they will probabaly all be
pretty similar.

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body