If they were offered in sets of varied sizes, the LPG Propane furnace =
building people would snap them up... There are sets out there for =
drilling gas orifices, but if you are considerably cheaper...

Des


> Hi all.
> What is the general opinion on the usefullness
> of thin (0.25 - 0.55) drill bits in the hobby/amateur/=20
> small-business areas ?
>=20
> In the last lot of drills I got at the liquidation site,
> there was some thinner drills with the following aprox counts :
>=20
> 0.25 mm : 2000 drills.
> 0.30 mm : 1400 drills.
> 0.35 mm : 7800 drills.
> 0.40 mm :  600 drills.
> 0.50 mm :  450 drills.
> 0.55 mm : 2000 drills.
>=20
> Either I cound try to find some to take them all, or I count=20
> sell them a box (50 or 100 drills.) at a time. I thought=20
> about asking $25-30 USD per box of 50 drills.
>=20
> Would you say that it would be worth the effort to put
> them up on the web page at that price ?
>=20
> I'd rather see them used by folks like me (hobby/small=20
> business), then to hand them over to some larger PCB manufacturer...
>=20
> Jan-Erik.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.