>
> > Or if you really wanted to give yourself a bit extra resolution then
> > plan on being able to reduce the Vref+ to 2.5V. At least build in the
> > pads that would allow a TO92 reference to be fitted later to do this as
> > someone will sure as eggs want better resolution :))

Yes, pads built in.  Not just for vref component, but also for op-amps,
cause these will allow me extra A/D inputs.  I'm monitoring current
into a ckt, so I intended to connect both sides of the shunt resistor
to separate A/D inputs and calc the diff there.  Later, I'll add
op amps if I feel it necessary.

> Or if you can live with the accuracy, two resistors and a capacitor to
> divide the 5V to make the 2.5V reference.

At this point I'm going to divide by 5 for the vref using 3 R's instead
of just dividing by 2.  So 1V ref should give me better resolution.

Thanks,
-Neil.

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu