Hi Olin.

Olin Lathrop wrote:
>
> > 16f877 running 10bit PWM. Output is tied to a 10K and .01uF cap.
> >
> > With the registers holding a static value, would you expect the output
> > voltage to be stable? Its acting as if the lsb's are toggling.
>
> The filter rolloff is about 1.6KHz, so a little ripple should be expected
> depending on what your PWM frequency is.

How 1.6KHz was obtained from 10K and 0.01uF ? ( what the formula )


WBR Dmitry.

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu