Was it just me or did this come dated 10/04/2002? ----- Original Message ----- From: "Olin Lathrop" To: Sent: Friday, April 11, 2003 7:11 AM Subject: Re: [PIC]: AD accuracy/limitations... > > Need to measure a few signals that will vary from 0V to > > 500mV, using a PIC. I don't need superb accuracy, say > > 10mV is fine. > > No problem. 1024 counts over the 5V range already gives you 4.9mV > resolution. You could increase the resolution with a Vref+ reference, but > it's already twice what you asked for. > > > ***************************************************************** > Embed Inc, embedded system specialists in Littleton Massachusetts > (978) 742-9014, http://www.embedinc.com > > -- > http://www.piclist.com#nomail Going offline? Don't AutoReply us! > email listserv@mitvma.mit.edu with SET PICList DIGEST in the body -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email listserv@mitvma.mit.edu with SET PICList DIGEST in the body