>At 04:59 PM 4/7/2003 -0700, Dave King wrote:
>
>> >>Then look up in the tech section for some messages that show how to modify
>>the ini file so that you can compile for 628's  You'll find that right in
>>front on
>>Hi-Tech tech support guy begrudgingly admitting it works,,,;-]

Then, after reading that, and doing some checking, I wrote:

> >>I looked for that and could not locate it.  Checked the Forum section and
>the FAQ.  Can you (or someone else) point me to it?

Still couldn't locate the support guy saying anything, but I think that I
have it figured out.  The Picclite compiler uses the
C:\picclite\include\pic.h file to zoom in on which chip to use (I think,
after a rather cursory look) and in there if either _16F627 or _16F628 is
defined (this is probably the command line specification of which chip to
use) it includes "pic16f6x.h" for the compile.  So, the point is (yeah, I
know I am rambling a bit) that the same include file is used for either the
627 or the 628.

While that may not be an exact explanation of what is going on, it is close
enough, I think, to give me the direction I need.

Thanks guys.  (And gals?  Haven't noticed any names of people of the female
persuasion :-(

John

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics