> -----Original Message-----
> From: Olin Lathrop [SMTP:olin_piclist@EMBEDINC.COM]
> Sent: Monday, April 07, 2003 1:36 PM
> To:   PICLIST@MITVMA.MIT.EDU
> Subject:      Re: [PIC]: 18F8720 PLL not working
>
> > Don't forget you have to pull the plug on it first for it to start
> > working.
>
> Huh?  How is this supposed to help the guy?
>
By reminding him that the PLL in not enabled immediately after programming
the configuration word, and that the power to the PIC must be cycled to
enable it.

Mike




=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================
Any questions about Bookham's E-Mail service should be directed to postmaster@bookham.com.

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads