In case the response is not clear: Mr Buehler's assertion is certainly not true. I used 6.10.10 for a 16F877A and I am currently using 6.13 to simulate and program a 16F877A and have done so with both the PICSTART PLUS and Warp-13a using the MPLAB interface. --- Michael Rigby-Jones wrote: > > -----Original Message----- > > From: Martin.Buehler@KEYMILE.COM > [SMTP:Martin.Buehler@KEYMILE.COM] > > Sent: Wednesday, April 02, 2003 11:45 AM > > To: PICLIST@MITVMA.MIT.EDU > > Subject: Antwort: [PIC]: Trouble programming > with MPLAB > > > > as far as i know, mplab 6.xx does not support > pic16fxxx. you have to take > > mplab 5.xx > > tino > > > MPLAB 6.x has supported the 14 bit cores for a > considerable time now. 17C > support was added relatively recently. > > Mike > > > > > ======================================================================= > This e-mail is intended for the person it is > addressed to only. The > information contained in it may be confidential > and/or protected by > law. If you are not the intended recipient of this > message, you must > not make any use of this information, or copy or > show it to any > person. Please contact us immediately to tell us > that you have > received this e-mail, and return the original to us. > Any use, > forwarding, printing or copying of this message is > strictly prohibited. > No part of this message can be considered a request > for goods or > services. > ======================================================================= > Any questions about Bookham's E-Mail service should > be directed to postmaster@bookham.com. > > -- > http://www.piclist.com hint: PICList Posts must > start with ONE topic: > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other > [BUY]:,[AD]: ->Ads __________________________________________________ Do you Yahoo!? Yahoo! Tax Center - File online, calculators, forms, and more http://tax.yahoo.com -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads