as far as i know, mplab 6.xx does not support pic16fxxx. you have to take mplab 5.xx tino Orbit Communications Gesendet von: pic microcontroller discussion list 02.04.03 12:37 Bitte antworten an pic microcontroller discussion list An: PICLIST@MITVMA.MIT.EDU Kopie: Thema: [PIC]: Trouble programming with MPLAB I am having trouble programming using MPLAB and PICSTART. I am using Version 6.13 of MPLAB and Version 3.3 (updated about 3 weeks ago) of the PICSTART firmware. At first it seemed to be a problem with the "A" version but I cannot get the original 876 programmed either. The sequence used is Select PICSTART PLUS as programmer Enable programmer Select device PIC16F876 or PIC16F876A Open Program Window Load Hex file Set configuration bits (it seems MPLAB does not read the config bits properly from the hex file or the device) Program. Anyone had problems programming using the new version of MPLAB or the PIC16F876A ? -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads