> -----Original Message-----
> From: William Chops Westfield [SMTP:billw@CISCO.COM]
> Sent: Wednesday, April 02, 2003 3:08 AM
> To:   PICLIST@MITVMA.MIT.EDU
> Subject:      [EE]: PALM PDA connectors...
>
> Does anyone know where I can get connectors to mate to the bottom of
> Palm PDAs?  I guess I'm interested in all three varieties :-(  Sony
> connectors would be nice to know about as well.
>
> The connector should be significantly cheaper than buying a hotsync cable
> ($10-$30) and ripping it apart.  I'm primarilly interested in access to
> the
> serial port that's usually (?) there.
>
> Small quantities (<10)
>
> Thanks
> Bill W
>
The only place I know of is http://www.atlconnect.com/main_prod_serv.htm .
The connectors are only a few bucks but they have a $65 minimum order.
Shame as I've also been after a connector for my Palm VX and my Visor.

Regards

Mike


=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================
Any questions about Bookham's E-Mail service should be directed to postmaster@bookham.com.

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads