> -----Original Message-----
> From: Orbit Communications [SMTP:info@ORBITCOMS.COM]
> Sent: Wednesday, March 26, 2003 10:57 AM
> To:   PICLIST@MITVMA.MIT.EDU
> Subject:      [PIC]: Programmer recommendation
>
> Thanks for the information regarding the micro-engineering bootloader. I
> have ordered the software and should receive it shortly.
>
> I am now also having problems getting MPLAB (Version 6.10.0.0) to program
> a target PIC16F876A. I am using PICSTART PLUS with an adaptor that takes a
> cable out to the ICSP socket on my target. It worked fine for PIC16F876
> but not the "A" version.
>
Does your PicStart+ have the latest firmware (3.11 I think)?  If not you
need to get hold of a PIC17C44 (prefereably a JW version) to upgrade it.

If all else fails you could try the 16bit MPLAB V5.74.

Regards

Mike



=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================
Any questions about Bookham's E-Mail service should be directed to postmaster@bookham.com.

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body