> Hmm, you may want to talk to these guys. Never had dealings with them, just
> got the link from a similar request previously on the Piclist from someone
> else, and figutred it looked interesting. I believe they are european based,
> with a licensee in the USA. This may give you the opportunity to get "just
> what you want".
>
> http://www.ttkbox.com/electronics1.htm
>
> Not sure where you are seeing you quoted a UK link.

I have used the South African agent. The good think about this way is
that you can also have any special cut outs done, where as if you buy a
off the shelf box, you still have to do some engineering on it.
Have a look:
http://www.iptech.co.za/maxus.html
What you see is the front panel, They fitted a clear plastic cover for
the LCD and cut four holes for the pushbuttons under the LCD. Also they
fitted mounting studs for the LCD and pushbuttons PCB and the main PCB
inside.
What you don't see is the back cover which have 5 round holes for
sockets, one square hole for main switch and one square hole for power
socket.

Turn around time for prototype was 6 weeks, there after 4 weeks
production (I was in the factory, they are very busy).

--
Quentin
qsc@iptech.co.za
www.iptech.co.za

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics