----- Original Message ----- From: "Andre Abelian" To: Sent: Tuesday, March 18, 2003 9:49 PM Subject: Re: [EE]: How are thermistors usually connected? > It sounds like you are planning to disassemble that board > > Andre Abelian > Parts already removed! Board is in trash can. By the way, Does anyone know an easy way to remove multy lead parts from a multy layer circuit board? John > > > -----Original Message----- > > Using a thermistor to measure temperature, what is the more commonly > used method, as a voltage divider using another resistor in series and > an ADC input. Or perhaps is using it in an RC network connected to a > digital I/O pin better. > > Thanks > > John > > -- > http://www.piclist.com hint: The list server can filter out subtopics > (like ads or off topics) for you. See http://www.piclist.com/#topics > > -- > http://www.piclist.com hint: The PICList is archived three different > ways. See http://www.piclist.com/#archives for details. -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.