Sid:

I've looked over PBPro again and have searched some example code lists only
to verify that unfortunately, there's no way to manipulate the timers in
BASIC. This is a serious shortcoming - I probably would not have purchased
it if I was aware of this limitation. I'll look at writing some assembly
code to divide and connect a timer output to a pin that you can paste into
your BASIC program. Please verify which (16F87X?) you're using, and also
which pins are available.

Chris

> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Sid Weaver
> Sent: Wednesday, March 19, 2003 11:22 AM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: PIC Chip
>
>
> I need a small PIC just to generate a timing signal.  No ADC,
> 1K memory is
> adequate, 8-pin DIP if possible.  Any suggestions?
>
> Sid
>
> --
> http://www.piclist.com hint: The list server can filter out subtopics
> (like ads or off topics) for you. See http://www.piclist.com/#topics
>

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.