Alex Kilpatrick wrote:
> Are you sure?  My meter (Fluke) has two possible inputs for measuring
> current.  One goes up to 10A (I think) and one is fused at 100 mA.  If
> it isn't fast enough to save the electronics, then what is it for?
The fuses used in my Fluke 25 are listed on the back panel as follows:
F 630mA 250V
F 3A 600V
F 15A 600V

It looks like the 630mA is a miniature 20mm, the other two are HUGE (about
an inch or so in length). Now if only I had a copy of the manual for this
beast... Then again, it looks like the '25 is a '27 with a few features
removed. Natch. And with a repair/calibration pricetag of #120...

Later.
--
Phil.
philpem@dsl.pipex.com
http://www.philpem.dsl.pipex.com/

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.