Hello,

I have finished laying out and routing my motor controller PCB (thanks =
for all those that helped) and am now proceeding to generate the =
required Gerber and drill files.  However, I have quickly ran into a =
problem.  EAGLE CAD has a predefined job for doing RS274x.  This job =
indicates that the solder side should be mirrored.  However, when I do =
this and then preview the resulting Gerber files in GC-Prevue the solder =
side is incorrect (i.e. it shouldn't have been mirrored). =20

My problem is that I am uncertain if I am using EAGLE CAD incorrectly =
(and should not be mirroring the solder side) or am using GC-Prevue =
incorrectly (and somehow need to specify that this signal layer is on =
the bottom of the PCB).

It seems it should all just be a matter of convention, but being new to =
this I am not sure what is most common.

Thanks for any help.

Regards,
Donovan

PS: How do you load a tool list file in GC-Prevue?  I know how to add =
the drill file, but can find no way to automatically load the tool list. =
 I am currently manually entering the tool list.

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads