I've had success with 19531bps masquerading as 19200bps.  1.7% worked well
for me.

Has anyone had good luck with receive of IrDA SIR?  What sort of transducer
is needed?

Jason Neudorf
----- Original Message -----
From: "Wouter van Ooijen" <wouter@VOTI.NL>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Thursday, March 13, 2003 7:47 AM
Subject: Re: [PIC]: Doing modulated IR with 16F628 internal clock


> > I suspect your real problem was not the 1200 baud drift, but the 38KHz
> > carrier drift going outside the IR receiver passband.
>
> Not likely, a 5% shift will kill asynchronous communication, but the
> common IR receivers that I know [
> http://www.vishay.com/docs/82030/82030.pdf ] a 5% shift will reduce the
> sensitivity to 60%, hence the effective distance to 77%.
>
> Wouter van Ooijen
>
> -- -------------------------------------------
> Van Ooijen Technische Informatica: www.voti.nl
> consultancy, development, PICmicro products
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>
>
> This message has been scanned for viruses and content
>
>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads