> Simplex, 1/2 duplex or full duplex? I have no idea. Probably 1/2. It is for a Dome camera. > What topology, 2 wire, 4 wire? 2 wire > Multi-point or point to point? It can be multipoint but in this application it is point to point. >What protocol? Looks like low speed stuff. Not sure, and yes. -Dan ----- Original Message ----- From: "Ray Gallant" To: Sent: Wednesday, March 12, 2003 2:01 PM Subject: Re: RS-485 to RS-232 > Simplex, 1/2 duplex or full duplex? What topology, 2 wire, 4 wire? > Multi-point or point to point? What protocol? Looks like low speed stuff. > May be of some help if we knew a bit more application details. Easier ->485 > to RS232 interface. Regards > > ----- Original Message ----- > From: "Daniel Gliebe" > To: > Sent: Wednesday, March 12, 2003 5:36 PM > Subject: [EE]: RS-485 to RS-232 > > > Does anybody know an easy and cheap way to use a PC Serial port, which is > RS-232, to listen only to data comming from a RS-485 device? I don't need > to send data back, only recieve. > thanks > > -Dan > > -- > http://www.piclist.com hint: To leave the PICList > mailto:piclist-unsubscribe-request@mitvma.mit.edu > > -- > http://www.piclist.com hint: To leave the PICList > mailto:piclist-unsubscribe-request@mitvma.mit.edu > -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads