The osc setting isn't set under normal program control.
So W-reg has nothing to do with this.
This config setting should be set by the programmer
at the same time as your program is downloaded.
I don't know your setup, but check that there isn't
some setting that disables the download of the config bits.

Jan-Erik Soderholm.


CaptMasterX@CS.COM wrote:
>Does anyone know exactly how to enable the internal clock?  I read how to do
>it in the data sheet...the register is in PCON, but I obviously can't load w
>with the right bits and save it in PCON b/c in order to execute the
>instruction I'd need the clock I don't have.

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu