Thanks!!.. I was under the inpression that the XT setting was for crystals =
lower than 4MHz, and HS for the higher than 4MHz...Goes to show I =
obviously didn't read far enough into it to pick the difference.

Thanks, again,
Des

>>> mailinglist@FARCITE.NET 12/03/03 8:10:36 am >>>
> FWIW, I am using it in HS mode.. that is correct isn't it? or
> should I be in XT mode?

        It SHOULD be XT for a 4MHz crystal, I'm not sure what would happen =
in HS
mode, you might damage the crystal, or result in no oscillation. I'm not
familiar enough to know, it's possible it would just work, with higher =
power
consumption.
        Please though, READ THE DATASHEET, this is VERY CLEAR in the =
datasheet and
if you haven't perused the datasheet properly you are wasting our time.
Sorry to be so harsh, but a PIC is something you NEED to consult the
datasheet for. I've been working with PICs on a hobby level for a few =
years
and STILL have to regularly consult the datasheet. TTYL

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body