You don't have to "wire" anything anywhere, leave
the port open and just connect your mAmp meter
between the pin and ground.
Jan-Erik.

Rick Regan wrote:
>> Does anyone
>> know the value of the on board pull ups? I have
>> looked through the data
>> book, but can not find a value for them.
>
> What if you wired the pulled-up input pin to ground
> and measured the current through the wire - couldn't
> you then calculate the pull-up value using Ohms Law?

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body