Hello,

THANKS!

The POLYGON command and naming it with the name of the signal works
beautifully.  I am drawing the POLGON on either the TOP or BOTTOM layer.
Now, in order to keep the autorouter from cutting a trace through the
POLYGON I am trace over it with another POLYGON on layer tRestrict or
bRestrict.  Is this the appropriate way to do this?

Donovan

> > I am interested in how you did a copper 'pour' in Eagle CAD.  I
> > have tried running several thick wires together and using the RECT
> > command, but am not sure how to tell EAGLE CAD that I want this to
> > be a big copper plan.  It keeps complaining that the wires are too
> > close together are that the wires and area filled with the RECT
> > command overlap.  Is there some way I can tell EAGLE that this is
> > suppose to be a big copper plane?
>
> Don't use a RECT. Draw a POLYGON and name it the same as whatever the
> signal should be (i.e. if it is GND then name it GND).
>
> --
> Ned Konz
> http://bike-nomad.com
> GPG key ID: BEEA7EFE
>
> --
> http://www.piclist.com hint: The list server can filter out subtopics
> (like ads or off topics) for you. See http://www.piclist.com/#topics
>

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics