At 08:32 PM 3/7/2003 -0800, you wrote:
>Is there a way to get regulated 15 V from a 7812 12 V regulator ?

The easiest way is to trade it for a 7815. You could also put a
zener (e.g. 2.7V or 3.3V) from the "GND" pin to ground.

Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the reward"
speff@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu