Wouter van Ooijen wrote :

>> Well,  I'm in the middle of the design right now, but I
>> plan to use my Wisp628 programmer. According to Wouter's
>> site (http://www.voti.nl/wisp628/index_1.html) it should
>> support the 12F629/675 chips.
>
>It does, but two notes:
>
>1. When you want to use the /MCLR as input pin you will need to add some
>external components (roughly 1k + TIP120) and use an 7805-based power
>for the target, and a separate power for the programmer.

No, MCRL are used as MCRL with a fixed 10k to 5v.

>
>2. The current xwisp PC software does not preserve the osc calibration
>   bits.
>

Any plans to support this ?
I havn't checked the xwisp Python source, but would it be hard to
add this function ?

Regards
Jan-Erik.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.