Well, it does add confusion :-)
I like the exterior surface mount of these, but it
forces me to drill a few holes, aligned with each other.

BUT, better than that, that farnell page, led me to a
better product -- a super shallow 3-pin DIN connector.
Mfgr data sheet is here...
   http://www.schurterinc.com/pdf/e_d/audio_20_23.pdf

Part #4850.2300 near the end of this doc.

And I've requested a few samples.

Cheers,
-Neil.




> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of G.Smith
> Sent: Friday, February 28, 2003 11:35 AM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: Re: [EE]: Looking for a connector -- The End...ish.
>
>
> On 28 Feb 2003, at 11:09, PicDude wrote:
>
> > I did indeed find some pretty shallow 2.5mm connectors, but
> they're still a
> > bit deeper than some of the RCA/phono's I'm finding.  So far
> the best I've
> > found is Digikey part #SC1134-ND, but I'll just run thru some
> more phonos to
> > see if there's anything better.
>
> If it would not cause confusion, some 2.1 mm power connectors are external
> aprt from tags - although they require a couple of fixing screws.
> Farnell 224972 for example.
>
> George Smith
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.
> ---
> [This E-mail scanned for viruses]
>
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body