The size on this sounds good, but the labor sounds painful.
I'm spending the time to find the right connector, cause
I'll be doing a few dozen of these.

Cheers,
-Neil.


> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Peter L. Peres
> Sent: Friday, February 28, 2003 3:18 PM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: Re: [EE]: Looking for a connector -- The End...ish.
>
>
> If you want to be very cheap you can use high quality turned IC socket
> pins. They work both as sockets and as plugs. That and shrink tubing and a
> bit of epoxy on the cased part and you have a small and fairly good
> connector. It is probably good for 200 or more insertions.
>
> Peter
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.
> ---
> [This E-mail scanned for viruses]
>
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body