2.5mm mono audio plug and socket would suffice as well?

>>> olin_piclist@EMBEDINC.COM 28/02/03 7:24:28 am >>>
> I need to find a small connector for passing a (low-voltage, low-power)
> digital signal and hoping that someone here may know of a good
> connector for this.  I'd need male and female, with 2 pins.  One side
> (doesn't matter which gender) will be mounted in an enclosure, and
> should be as small as possible (like an AT-kybd DIN-sized or smaller),
> and ideally require a round hole in the panel.  Polarized is preferred,
> though I can work without.  This will not be repeatedly inserted and
> removed, so any basic connector will work.  Signal will be 5V, at
> approx 10kHz-ish (serial data).

Sounds like a PS-2 mouse connector would do nicely.


*****************************************************************
Embed Inc, embedded system specialists in Littleton Massachusetts
(978) 742-9014, http://www.embedinc.com=20

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics