> There is the method of the stacked offset board. This works
> if your chip
> is on a socket. Basically it's a 'pin protector' but there is a small
> board between the female and male sockets and the flatcable
> is connected
> to the board. Would this help ?

Only sometimes. As you imply it does not work when the chip is soldered.

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu