Is the firmware source code part of the PC software download?   I cant find
a link to the firmware source.

----- Original Message -----
From: "Wouter van Ooijen" <wouter@VOTI.NL>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Sunday, February 23, 2003 3:29 PM
Subject: Re: [PIC]:Building programmer for 18F


> > I started to build a programmer(hardware) designed for the
> > 18F series chips.   I have all the vlotage correct but am
> > haveing a bit of a problem.
> > I can send the serial commands to the chip in program mode
> > and get read information correctly.   However I cant write
> > any information to the chip.  Im pretty sure the
> > configuration bits are set correctly as I have set them with
> > another programmer.
>
> They *can* be programmed, so you are obviously doing something wrong.
> You might have a look at the Wisp628 firmware code
> (http://www.voti.nl/wisp628).
>
> Wouter van Ooijen
>
> -- -------------------------------------------
> Van Ooijen Technische Informatica: www.voti.nl
> consultancy, development, PICmicro products
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body