Just a silly question :-
Have you checked the cables?? - (Preferably be temporary replacement)

Richard P





Michael:
> Is there any way to get the radials that are in the water to be under
> the sand?  I've never been on a small island, but I suspect that the
> sand moves around to much due to the tides.  Maybe you could put the end
> of each radial in a bucket of concrete to help keep it from moving
> around so easily?

Sorry for being late.  Got a sore thumb for the last 2 days and this make
typing difficult - a result of manual tuning the ATU.  I have combined
different posts and did some "cutting", hope this make the thread easier to
follow.

On one side of the platform is a short sandy beach, the radial wire on this
side is not buried.  But this side is still holding because it is protected
from the water-movement by the platform.  The platfrom is a peninsula, the
other two sides face the open sea and the radial wires are messed up there.
There was a fix being done, but wasn't done properly as tiny-copper-wires
were added and are all corroded.

snip.............

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.