Hi all


I want to run my PIC at 3.3 volts but have a GLCD that requires 5 volts. It
was suggested by a friend that I could use the HPWM and a few diodes / caps
etc to generate the voltage required to power the GLCD at 5 volts. I need no
more than 5 ma for the Logic.

My questions are.

What kind of current could I generate with the HPWM Diode set up and can any
body point me in the right direction to find the components values etc to do
this.


Many thanks

Tim

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads