Thank you !  That is exactly what I was seeing !



-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Ned Konz
Sent: Friday, 21 February 2003 1:07 pm
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [EE]: Differential Amplifiers


On Thursday 20 February 2003 06:00 pm, Ian McLean wrote:
> Just 10kHz input in simulation.  In reality it would only be 5.  Is
> this where I am going wrong.  As Richard has suggested, am I
> reaching a slew-rate limit ?

The LM358 will swing its outputs from 0V to V+ - 1.5V. So you can
expect to see clipping at 3.5V if you have a 5V supply.

Its input common mode range has the same limits.

--
Ned Konz
http://bike-nomad.com
GPG key ID: BEEA7EFE

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu