At 07:56 AM 2/20/03 -0500, Olin Lathrop wrote:

>No, you just don't have the mode set right.  The program memory window has
>three modes.  You have it set to "hex code display".  The other two are
>"machine code display" and "disassembly display".

Specifically, left click the little icon at the extreme left side of the
program memory window's caption bar and select the desired mode.

dwayne

--
Dwayne Reid   <dwayner@planet.eon.net>
Trinity Electronics Systems Ltd    Edmonton, AB, CANADA
(780) 489-3199 voice          (780) 487-6397 fax

Celebrating 19 years of Engineering Innovation (1984 - 2003)
  .-.   .-.   .-.   .-.   .-.   .-.   .-.   .-.   .-.   .-
     `-'   `-'   `-'   `-'   `-'   `-'   `-'   `-'   `-'
Do NOT send unsolicited commercial email to this email address.
This message neither grants consent to receive unsolicited
commercial email nor is intended to solicit commercial email.

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu