I use MPLAB V5.70.0 and have none of the problems as described. I have tried both "windows" right now and both show all three modes. On the other hand I use the CCS tools and have done so for the last 6 years. Have not tried the 18xxx yet, so I can't tell about that. PerL ----- Original Message ----- From: "Nigel Orr" To: Sent: Thursday, February 20, 2003 12:15 PM Subject: Re: [PIC]: Up is not UP, Down is not Down, and OSCCAL is not CAL'd > Alan Pearce wrote on Thursday, February 20, 2003 9:26 AM: > > >> Aha! I am beginning to smell a rat. In MPLAB 5.70.40, the > >> program memory window is useless! This sounds like an MPLAB > >> issue to me. It does not display opcodes, it just displays > >> a hex dump of program memory. > > > > Huh???? I just loaded the hex file that is used to update the ICE-1, > > and it certainly shows me opcodes. Now the bit and registers names > > There are 2 different "program memory" windows in all the recent versions > of MPLAB which I have used. One is what Alan has just described, one is > what Lawrence has described. > > ISTR that Alan's one (the useful one!) appears when you have set up a > project including your hex file, Lawrence's (not-very-useful-at-all-one!) > appears if you import a hex file from the File menu. Unfortunately, I > don't have MPLAB in front of me at the moment to check, and it's a few > weeks since I last had the same problem. > > Nigel > -- > Nigel Orr, Design Engineer nigel@axoninstruments.co.uk > Axon Instruments Ltd., Wardes Road,Inverurie,Aberdeenshire,UK,AB51 3TT > Tel:+44 1467 622332 Fax:+44 1467 625235 > http://www.axoninstruments.co.uk > > -- > http://www.piclist.com hint: To leave the PICList > mailto:piclist-unsubscribe-request@mitvma.mit.edu -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu