Resent due to OE tag stripping, sorry I haven't caught on yet.  ;-)

> Hi RF Jim, Sean and all,
>
> Can someone introduce me to any good sites for antenna grounding?

The ARRL Antenna book is probably the best document available.

> The problem with the system that needs fixing I think is with the
radial
> ground network.  The antenna is installed in a small island. The
radial
> wires go into the sea, strong waves and current entrangles the whole
network
> and breaks the wires.  When this happens, the reflected power rise to
50%of
> transmitted power and tripped the transmitter.

I take it this is a large 1/4 wave antenna for low frequencys.  You
won't get a ground plane much better than the radials in sea, but you
can use an LC network to match the transmitter (actually the feed line)
to the changing impedance of the antenna.  This will make the
transmitter much happier, but it won't make the antenna work any better.

> Is any other method of grounding (without needing to extend into the
sea)
> that might solve this problem?

Not that I am aware of.  :-(  Maybe you could use copper pipe instead of
wire?  Outside of that, the only thing I can think of is to switch to an
antenna system that doesn't need a ground plane  e.g. a dipole.

michael

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu