At 08:19 PM 2/20/2003 +1000, you wrote:

>  You may be able to use a 2-D LUT with interpolation
to give you DewPoint(t_C, RH).

P.S. do a search on "bilinear interpolation" if you want to pursue this
approach.

Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the reward"
speff@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu