Alan Pearce wrote on Thursday, February 20, 2003 9:26 AM:

>> Aha! I am beginning to smell a rat.   In MPLAB 5.70.40, the
>> program memory window is useless! This sounds like an MPLAB
>> issue to me.  It does not display opcodes, it just displays
>> a hex dump of program memory.
>
> Huh???? I just loaded the hex file that is used to update the ICE-1,
> and it certainly shows me opcodes. Now the bit and registers names

There are 2 different "program memory" windows in all the recent versions
of MPLAB which I have used.  One is what Alan has just described, one is
what Lawrence has described.

ISTR that Alan's one (the useful one!) appears when you have set up a
project including your hex file, Lawrence's (not-very-useful-at-all-one!)
appears if you import a hex file from the File menu.  Unfortunately, I
don't have MPLAB in front of me at the moment to check, and it's a few
weeks since I last had the same problem.

Nigel
--
Nigel Orr, Design Engineer                 nigel@axoninstruments.co.uk
Axon Instruments Ltd., Wardes Road,Inverurie,Aberdeenshire,UK,AB51 3TT
               Tel:+44 1467 622332 Fax:+44 1467 625235
                   http://www.axoninstruments.co.uk

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu