I do not have the spec shee handy. However, I believe it is readily available from th Maxim Semiconductor site (be sure to sarch Maximum Semiconductor, as the Maxim site is something quite different) The selection of components at the higher end becomes more critical in order to maintain sine wave fidelity. Your application idea is good one. Get the spec sheet and proceed. Rich ----- Original Message ----- From: To: Sent: Monday, February 17, 2003 2:53 AM Subject: [EE]: MAX038 slave mode > as the max038 is actually discussed here, i would like to ask a question > about it too: > > the MAX038 may be used in slave mode, where it is synchronized to an > incoming clock. > as the R/C based frequency selection of the MAX038 gives a relatively > unstable frequency, i would like to connect it to a pic controlled, > digital frequency synthesizer as a slave, just used to generate the > selected waveform. > what values for C and R do i have to use to select a base frequency for > the MAX038, so that the chip is able to synchronize to an incoming > frequency of 0.1Hz-20MHz? > thanks! > tino > > -- > http://www.piclist.com hint: The list server can filter out subtopics > (like ads or off topics) for you. See http://www.piclist.com/#topics -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics