Sean-
I'm confused.  The layout of the BAV199 (I couln't find a BAV99) appears
to be laid out for exactly this application.  Granted you might have to
draw a net throught the device to continue you inout line, but I do not
find that terrible.
David

Sean Alcorn - PIC Stuff wrote:

> Peter,
>
>> How can you 'separate' the two diodes ?!
>
>
> Just because they are physically connected in the same package does not
> mean you always want them in the same spot on the schematic -
> particularly with say a BAV99 - a A-K-A-K arrangement. You want the
> common (A-K junction) pin to go to a PIC input (for example) and one
> diode (gate) to be placed above that input line (to Vcc normally) and
> another below it (to Ground usually)
>
> Regards,
>
> Sean
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu