On Sat, 15 Feb 2003, Sean Alcorn - PIC Stuff wrote:

*>Peter,
*>
*>> How can you 'separate' the two diodes ?!
*>
*>Just because they are physically connected in the same package does not
*>mean you always want them in the same spot on the schematic -
*>particularly with say a BAV99 - a A-K-A-K arrangement. You want the
*>common (A-K junction) pin to go to a PIC input (for example) and one
*>diode (gate) to be placed above that input line (to Vcc normally) and
*>another below it (to Ground usually)

But you clearly said 3 pins ? I am clear about 4 pin devices. Maybe I
misunderstood.

Peter

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu