In a message dated 02/13/2003 18:40:01 Eastern Standard Time,
dans_pic_stuff@HOTMAIL.COM writes:


> i.e. Can I set the output pins and let the hardware maintain the PWM pulses
> indefinitely without having to do any looping?
> Thanks for any advice.
>
>

I'm not familiar with the 628, but if it has a CCP1 and a CCP2 module you can
output PWM continuously in the background while the program does something
else.  You will have to use the HWPM command - make sure it is structured
correctly, pin, duty cycle, frequency.  CCP1 and CCP2 modules are usually on
C.2 and C.3

Sid

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.