At 05:23 PM 2/13/2003 +0000, you wrote:
> > I am trying to hook up an I2C A/D converter,
> > and the SDA and SCL lines show a 2K resistor
> > on their example, but the example is using 2.7 to 3.6 vdc
> > supply.
> >
> > So, this can't be what's needed for a 5 vdc supply, can it?
>
>Get the Definitive I2c document from the Philips web site. It explains
>everything in plenty of detail, including how to match 3 & 5V logic.
>
>http://www.semiconductors.philips.com/buses/i2c/support/index.html
>
>and right down the bottom, almost the last link is the I2C specification.

Yes, this is the right place to go..

Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the reward"
speff@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.